1. Meade Dsi Drivers For Mac Windows 10
2. Meade Dsi Pro

Meade Deep Sky Imager IV (Mono)

Meade DSI This plug-in driver is available as part of the Obsolete Driver Pack. For this driver, please select Meade DSI on the Setup tab. This driver controls the Meade Deep Sky Imager, which connects to the computer via a USB 2.0 interface. The above post is correct, just download and install envisage from the meade site, then during the install it will ask you if you want to install the meade DSI driver and the meade LPI driver, just say yes to both and away you go, I used to guide with an old DSI colour and worked a.

The Meade Deep Sky Imager (DSI) IV Mono is a dedicated astronomy camera featuring a cooled 16MP CMOS sensor. The thermoelectric cooling, and monochrome Panasonic 4/3” MN34230PLJ image sensor are what I value most in this camera. There is also a one-shot-color version of the DSI IV available, for those that prefer to capture images this way.

A cooled monochrome astronomy camera is an efficient way to collect astrophotography images through LRGB filters to build an impressive color image. The camera cooler ensures that the sensor does not produce added noise by warming up during a long exposure, and a monochrome sensor is better at collecting quality signal (light) than a color camera is.

The Meade Deep Sky Imager IV (Mono)

The mono version of this camera has several competitors using the same chip. The reason I have chosen to go with the Meade variation is simply because I was given an opportunity to test it and share information about it. This camera was generously loaned to me from Ontario Telescopes.

You can see the Meade DSI IV mono as the primary imaging camera on a complete deep sky astrophotography rig in this video:

In the video above, you’ll see that I’ve got the Meade DSI IV mono connected to a 5-position electronic filter wheel to capture images in LRGB through an Explore Scientific ED 102 telescope. Everything is balanced perfectly from the weight of the imaging payload, to the accessories riding along on top of the telescope.

Related Post:Astrophotography Gear Update (2019)

Meade DSI IV Mono

The sleek design and impressive weather resistant carrying case are the first things I noticed with the Meade DSI IV. Although Meade lists the inclusion of the SkyCapture software as an added value, I believe many future owners of the Deep Sky Imager will prefer to use their own astrophotography software with this camera.

Meade also draws attention to the fact that this astronomy camera has a fast USB 3.0 readout, which is important for planetary imaging. I have a feeling the Meade DSI IV mono will be used more for long exposure astrophotography, thanks to its low read noise properties. When it comes to high quality astrophotography images, noise is the enemy.

Cooled cameras like this still blow me away in terms of how little noise they produce even when exposing the shutter for 5-minutes at a time in the summer heat. Those coming from a background in DSLR astrophotography like myself will likely experience this eye-opening moment as I did the first time I used a cooled camera.

16MP Panasonic 4/3 Sensor

The Panasonic MN34230PLJ CMOS sensor is a very popular chip for dedicated astronomy cameras. As you’ll see in the table below, this CMOS sensor is found inside of astronomy cameras from several brands.

Brand	Camera
Meade	DSI IV Mono
ZWO	ASI1600MM Mono
QHY	163M
ATIK	Horizon
Mallincam	SkyRaider DS16C

The Deep Sky Imager series of cameras from Meade has been around for a long time. As a matter of fact, I still own a Meade DSI Pro II camera that I purchased back in 2012. I used this camera for autoguiding exclusively, and it worked well for many years until I finally upgraded to an Altair GPCAM2.

The Meade DSI Pro IV houses the same sensor found on the ZWO ASI1600MM (Panasonic MN34230PLJ CMOS). This camera has built up quite the reputation over the past years, and some of my favorite amateur astrophotographers use this camera. I anticipate the Meade DSI IV mono to keep pace with the image quality of the 1600.

A lot of amateur astrophotographers that have been in the game for a while have fond memories of using Meade cameras many years ago. There was a large gap between the release of the Meade DSI III and the IV. Here is an interesting discussions about this timing from the Cloudy Nights forum.

After unboxing the Deep Sky Imager IV monochrome camera in my frigid garage, I placed each item on the table to get a good look at what’s included in the package from Meade:

What’s Included:

• DSI IV Camera
• 2″ Nosepiece
• AC Power Adapter (US plug only)
• USB 3.0 cable
• Desiccant plug
• Software CD
• Hard carrying case

Meade Deep Sky Imager IV – First Impressions

The camera is very impressive in terms of design and build quality. I like that Meade decided to include a robust hard carrying case with this camera, which I will put to good use when traveling to darker skies with this camera.

The software for the camera was provided on a CD, which felt a little “old-school” to me. My imaging laptop is very compact, and does not include a CD drawer. This means that I had to pull the the camera drivers and SkyCapture software off of the CD and on to another machine first.

The necessary drivers needed to run the camera using third party software such as Astro Photography Tool (APT) are on the CD only. The software downloads are not available from the product page as stated in the user guide.

Instead, navigate to the downloads page of the support section. There you will find what you need inside of the SkyCapture software download folder.

Meade Dsi Drivers For Mac Windows 10

Connecting to Third Party Camera Control Software

When I first attempted to use the Meade DSI IV camera, I was delivered an error in connection from Astro Photography Tool when clicking the “properties” tab.

The problem was that I needed to copy the ASCOM Meade driver (only found on the CDROM) over to my imaging laptop and install. This driver is not available online from the Meade website.

Having already installed the Meade drivers found on their website, my assumption was that I needed to also install the DirectShow drivers mentioned in the user guide, but not available online.

The error code I received when clicking the properties tab in the ASCOM chooser

This was indeed the issue, and solved the problem. So if you are in a similar situation, make sure you install the DirectShowDriver that is included on the included CDROM. So aside from the standard ASCOM drivers, make sure you install all of the files from the CD.

SkyCapture Software

I did try out the Meade SkyCapture v2.1 software, and was not overly impressed. The user interface feels dated, and in my experience, the left-hand menu bar did not load properly. The “trigger mode” section was inaccessible.

I did investigate a few areas of this application including the default image format captured (.png) and the location of where the files are stored. If you choose to use the SkyCapture software to run your Meade DSI IV mono, be sure to change the image format to FITS.

With the Meade ASCOM driver installed, I was finally able to adjust the settings of this camera in Astro Photography Tool including frame rate, gain and black level. To test the cameras cooling function, I told the camera to reach -25 degees C, 2 degrees at a time.

The camera cooled very quickly, faster than the ASI294MC Pro. Once the camera hit my intended target of -25 C, I took some dark frames that I can apply to a future imaging session.

Meade DSI IV Mono Specs:

• Camera Sensor: Panasonic MN34230PLJ CMOS
• Sensor Size: 4/3″ format, 16 Megapixels (4640 x 3506)
• Pixel Size: 3.8μm x 3.8μm
• Cooling: Two-Stage TEC, 40 – 45C below ambient
• ASCOM Compatible: Yes
• Interface Type: USB 2.0 or 3.0
• Back Focus Distance: 17.5mm
• Image Formats: JPEG, BITMAP, FITS

Back Focus Distance

The back focus distance on the Meade DSI IV is 17.5mm, which means that this is how much space is between the camera sensor, and the edge of the camera. You can use this measurement to calculate the correct spacing when you have the camera connected to a field flattener/reducer, and your telescope.

I have the Meade DSI IV threaded to my filter wheel using an M54 t-mount adapter, and then a 0.8X Starfield reducer/flattener sits on the other end to connect to the telescope. The mono camera sensor can now capture images through each filter (red, green, blue, and luminance), and can be controlled using software on my PC (APT).

Connecting to a Filter Wheel

As I mentioned, I have the Meade DSI VI mono connected to a Xagyl 5-position filter wheel. This allows me to easily change the 2-inch Optolong LRGB filters that sit in front of the camera without touching my telescope. The wheel is connected to my PC using a mini USB cable, and controlled using the ASCOM filter wheel controls found in the gear tab of APT.

To fasten the camera to the filter wheel, I used the Xagyl M54 t-mount adapter to thread it on to the opening on to the 2-inch opening on the wheel. The spacing was important here, as the field flattener/reducer I use requires 55mm of spacing between the camera sensor, and the back of the flattener for optimal imaging performance.

Attaching a 5-position filter wheel to the Meade DSI IV

You can control a filter wheel like this in most astrophotography software applications, such as Astro Photography Tool or Sequence Generator Pro. The filter can be selected ahead of time and scheduled into a sequence of image captures through each one.

One of the main reasons I chose to use this camera and filter wheel with my Explore Scientific ED 102, is because this telescope includes a motorized focuser. I added a Pegasus Astro stepper motor kit and dual motor focus controller (DMFC) early last year, and it allows me to quickly re-focus between filters remotely.

Here is a breakdown of the astrophotography rig I am using with the Meade Deep Sky Imager IV Mono:

• Mount: Sky-Watcher EQ6-R Pro
• Telescope: Explore Scientific ED102 CF Refractor
• Camera: Meade DSI IV Mono
• Filter Wheel: Xagyl 5-Position 2″ Wheel
• Filters: Optolong LRGB filter set (2″)
• Guide Scope: Starfield 50mm Guide Scope
• Guide Camera: Altair GPCAM2
• Focuser: Pegasus Astro Stepper Motor Kit w/ DFMC
• Power: Pegasus Astro Pocket Power Box
• Camera Control: APT via Laptop Computer

The camera and filter wheel attached to my telescope in the garage.

Final Thoughts

The real test of the Meade DSI IV will happen when I actually start collecting some deep sky images with this camera from my backyard. As the images roll in, I will share my results on this page and on my social media profiles.

I could not find a single image taken with the Meade Deep Sky Imager IV on Astrobin yet, so I feel like the images I share may be placed under the microscope, at least until more images start to roll in.

The plan is to capture enough data through each LRGB filter to create a full color deep sky image. With a limited clear sky time window and the Orion constellation quickly fading into the western sky each night, I may choose to photograph M42 for the 300th time to test this camera. I can HEAR your eyes rolling from here.

Related Posts:

I though I should start off another blog about my forays into CCD astro-imaging since the last blog about it was growing way out of proportion. And since all I have been doing of late is investing heaps of time into getting the 'system' to work properly, I felt it was time I paid particular attention to documenting the ups and downs of this wonderful and cheap (well its pretty cheap as it is only available on the used market now. Meade does not make them anymore!) CCD camera. As I have mentioned numerous times across many blogs, we live in the golden age of astronomy gear. The influx of products from the east has made everything so affordable. There is absolutely no excuse now not to get into the complex world of astrophotography, be it afocal or prime focus. So without further ado, let me introduce this wonderous little marvel of a camera we call the Meade DSI.

The Meade DSI One shot color CCD camera was introduced in late 2004. It was a breakthrough product for Meade, much like what Celestron did with their NexImage Planetary and Lunar camera. Several things had it going for the camera. Firstly it was, as mentioned previously cheap. Secondly it had the desirable Sony Super HAD Color CCD sensor, which was heaps sensitive for fainter DSO's. And thirdly it required no external power. Drawbacks included a smaller chip, no active cooling and getting it to work properly with some operating systems was a bear (according to early reports). Also it has an IR chip that is easy to break if you unscrew the 1.25' nosepiece frequently and Meade's Autostar software does not work with Mac's. To use the DSI with Mac's, you will have to either download VW ware and run Window's in the Mac, or use a third party capture software such as Stark Lab's Nebulosity. Thankfully I came onto the astrophotography scene late and most of these teething problems have been solved one way or another by other fellow astronomers. Another plus point coming in late was that these are now available for even cheaper on the used market for beginner astrophotographers like me. Briefly here are the specs:

Specifications

Meade also boldly proclaims 'Take pictures like these your first night out' on its colorful box showing images of M20, M51 and NGC 891. Although not entirely true, learning how to use the camera is not all that difficult. The image capture software bundled with the CCD camera is pretty spiffy. If you have a Meade telescope, Autostar can drive your scope for you. If not all is not lost. Together with Autostar is the Autostar Suite that includes everything required for image capture and processing. In fact Autostar Envisage is able to do 'in-house' everything for you from dark frame subtraction to image stacking. Spiffy indeed. All one has to do is master its not so user friendly controls. I have discussed its controls in a rather detailed fashion in the previous blog, including comparisons with Stark Lab's Nebulosity.
Note that there are now 3 versions of the Meade DSI's available. As of writing, none of them are currently in production so you have to get them used online, like I got mine. All three (actually more like six since for every DSI, there is a one shot color version and a monochrome pro version with filter slide) share the same metal convective body. The only difference lies in its chip size. The original Meade DSI, the one I currently use has the smallest chip by far, coming in at a miniscule 648x488 pixels. DSI II has a slightly larger chip, not by much though 748x577 pixels (apparently they are the same as the current Orion Starshoot G3 deep space color imaging camera so if you want to buy new, this is the option). Then comes the DSI III and it has by far the best chip of this series, with a chip two times the size of the original chip in DSI I (1360x1024 pixels). A larger chip means easier framing of objects and better resolution overall.

Now that all the preliminaries are out of the way, here are some tips an tricks to get the most out of your images. Note that I am also a beginner and therefore I am still experimenting. here is a ist of things to do to get you up and running:

Meade Dsi Pro

• The most important thing on the list is probably to firstly make sure you computer's operating system works with the Meade DSI drivers. People have had issues in the past, but it looks like most of the kinks have been ironed out. There were a lot of people having issues with running Meade's Autostar and Envisage on laptops running Windows Vista. I am happy to note that I have not had any major issues. I downloaded the drivers from Meade's web site and it seems to be working just fine.

• Make sure your scope has enough backfocus!! I cannot overemphasize this. I though my CCD cam was broken, until I discovered all my short focal length newtonian's did not have enough backfocus to get a focused image. Refractors do not have issues as they have a long backfocus. My problem was immediately solved when I went the refractor route. SCT's would work fine too as would Mak's (I am assuming this but don't quote me on it!).

• Another issue a lot of people have is underestimating the magnification factor and getting objects square on the chip to focus, let alone image. At prime focus, the CCD cam gives a magnification factor similar to a 6mm eyepiece, so imagine how hard it would be to get anything in the FOV if you are using a long focal length scope. Also since the original DSI had such a small chip, getting the image square on the chip is a major hassle. Firstly, if you are going to be imaging with SCT's, their long focal length can immediately work against you. With that said, imaging with a focal reducer is an absolute must. With SCT's you have a wider choice of focal reducers available to you since there are focal reducers made in all reduction factors. With refractors its harder as you have to get screw on ones. A few places carry such 1.25' reducers such as Agena Astro, Adorama, Orion USA, Owl and a host of others. They are all 0.5x reducers so they cut your scopes focal length by half and go for around $30! I got mine from Orion telescopes and it made a whole world of difference when imaging DSO's.

• Focusing. Another major issue is getting the cam to focus. The first few tries for me was frustrating as I could not get the cam to focus. And when it is not focused, all you get is a white screen. The refresh is also very slow and it takes time to get it right.....but spend time finding the focal point for your scope and then either mark it (as I did on my focus drawtube using a marker). The other option is to use the parfocal rings that come with the DSI. Mine did not have the screws so I could not use them. Also when finding the correct focus, use a Hartman Mask. It can be as simple as two slits drawn on each side, one vertical and one horizontal. Place this over the aperture and you will get two images, focus until you get a single point and that is your point of focus! Note that the original Meade DSI's, while good never seem to get stars pinpoint sharp no matter how good your focus is. This is just one of the quirks of the cam.

• Take dark frames, although I found this to be a non issue most of the time I was imaging. Its amazing how low electronic noise is on this CCD cam. Just make sure you let the cam equilibrate to ambient temperature if you are coming from a warm room out into the open field. Also instead of letting the cam take dark's for every single exposure (takes about 10 minutes to do this!!!), you can choose to just do dark's for the exposure you usually work with.

• Take as many shots as humanely possible for stacking. This will greatly increase data in your image (those wispy nebulae tendrils will show up only if you stack multiple images) and reduce noise.

• If possible try to image from a dark site. I know this isn't always easy, especially if you are living in a big city. But try to get away. Its amazing what a difference this makes. A good example are some of my earlier images (see the post on Astrophotography). Notice how red the backgrounds were. This is actually the direct result of light pollution. The color balance of my images were all out whack. Also exposure times tend to be very limited, even when you stack images. I found for some parts of my Los Angeles sky, I could not even do 20 second exposures!!!! Under the darker skies of Solstice Canyon in Malibu, even 30 seconds is doable without a filter. One of the tricks I use when imaging from suburbia is to use a Orion SkyGlow filter. this helps heaps with imaging the brighter fare and getting properly color balanced images. a downside to this is on fain objects. Electronic noise is very evident and some images appear downright grainy with the filter. under such circumstances, take dark frames.

• Finally learn to use Photoshop properly to bring out the data in you images. I am not going to go into the details here because there is so many things you can tweak on your image to bring out those faint spiral arms.

And do remember to have fun! I used to think that astrophotography involved heaps of cash outlay and a super precise and super expensive getup, as well as a very steep learning curve. Meade, Celestron and Orion, to their credit, have brought astrophotography to the masses. These cams are a whole heap cheaper than the top of the line cams and they perform pretty well for the price. Also they are a lot more forgiving on the tracking. I use a basic Celestron NexStar 102GT, basically an alt-az GOTO mounted scope and get some pretty good images. While not at the level of the photos you see on Astronomy or Sky and Telescope, they are my personal picture postcards from my travels into outer space...nuff said.....
Note: All photo's taken on the same night from Solstice Canyon, Malibu. 5x20 sec exposure